1928 10 cents

rick.page
Posts: 13
Joined: Sat Feb 27, 2016 8:06 pm
Location: Peterborough

1928 10 cents

Postby rick.page » Wed Apr 18, 2018 5:55 pm

Does this 1928 10¢ have a die crack or is this an example of PMD? Could this be done intentionally? Damage is only on the reverse.
Attachments
1928 10¢.JPG
Die Crack?

coinguy
Posts: 138
Joined: Tue Aug 16, 2016 10:03 am

Re: 1928 10¢

Postby coinguy » Thu Apr 19, 2018 6:36 am

PMD
Just a heavy scratch.

Shylo
Posts: 213
Joined: Fri Apr 12, 2013 10:42 pm

Re: 1928 10¢

Postby Shylo » Thu Apr 19, 2018 5:08 pm

A die crack would appear as an exclusion not an intrusion...

at the 1 o'clock point of the top crown on the reverse it does look like there's a die crack.

The long large crack down the reverse would need a bit deeper investigation... it could be a scratch or it could be a strike through wire or planchet flaw. The photo would have to be enlarged to see where raised parts meet the fields and see the "crack" in question

troubadour
Posts: 57
Joined: Thu Nov 24, 2016 3:46 pm

Re: 1928 10¢

Postby troubadour » Thu Apr 19, 2018 5:49 pm

A very bad scratch.

Bill in Burl
Posts: 495
Joined: Thu Sep 04, 2008 7:41 am
Location: Golden Horseshoe, ONT

Re: 1928 10¢

Postby Bill in Burl » Thu Apr 19, 2018 7:57 pm

Because it passes through both the design and the field, I think that it is definitely a scratch. However, where it starts on the top, It appears to go through the rim. A die crack would be a protrusion rather than an incuse mark below the surface. A strike through very seldom will show in the dsesign or lettering, since those are incuse areas of the die.
Bill in Burl


Return to “10 cents”

Who is online

Users browsing this forum: Baidu [Spider] and 3 guests